Get Gamma - Canon REALiS SX6 User Manual

User Command Specifications
1

GET GAMMA

GET GAMMA
Commands
Function Gamma adjustment value inquiry
GET□GAMMA
Format
?△GAMMA
Response
g:GAMMA=<Gamma adjustment value：Number>
For all other responses, refer to "Error List."
Description This inquires about the current gamma adjustment value.
-1
This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
A "busy" response is given while the zoom or focus lens is being driven.
（Refer to the ZCONTDRV command and FCONTDRV command.）
-2 The gamma adjustment value can be set by the GAMMA command.
Example > GET GAMMA or ? GAMMA
< g:GAMMA=3
* Commands are indicated by ">", and responses are indicated by "<".
Commands
SX50
supported
01.00**
○
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1 A-RGB2 Comp
○ ○
× ×
SX50
○ ○
SX6 × ×
SX60
X600
* If a command cannot be supported, 'INVALID_MODE' or 'NOT_POWER_SUPPLIED' is returned as an error response.
* "i:BUSY" may be returned if the power status is being switched.
SX6 SX60 X600
01.01** 01.01** 01.01**
○ ○ ○
Input
Video S-Video D-Video SCART
○ ○ ○ ○ ○
○ ○ ○ ○ ○
Mode Control Setting Reference
Mode
None Remote
○ ○
– –
○ ○ ○ ○
PAGE 87
9．Details of command GET GAMMA
Number
Remarks
Local
×
×