Page 1: Projector Lamp
trusted dependable most name projector lamp sales. http://www.myprojectorlamps.com http://www.myprojectorlamps.ca http://www.myprojectorlamps.eu The following projector manual has not been modified or altered in any way.
Page 2 Safety Instructions Before Use MULTIMEDIA PROJECTOR Setting Up the Projector Projecting an Image from the Computer User’s Manual Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 3: Quick Reference - How To Start Projection
Quick Reference – How to start projection Computer Install the projector. P28-29 Install the projector at the desired distance from the screen. Install batteries in the remote control (P26) Connect the projector. P32-34 Connect the projector and the computer with a cable. Turn on the projector.
Page 4 AV Equipment Install the projector. P28-29 Install the projector at the desired distance from the screen. Install batteries in the remote control (P26) Connect the projector. P56-58 Connect the projector and the AV equipment with a cable* (see P34 for the instruc- tion on connecting a audio cable).
Page 5: Features Of The Multimedia Projector Sx6/Sx60/X600
Major Features Smooth and Beautiful Imaging Capability Incorporation of AISYS, Canon's unique optical engine, and LCOS (Liquid Crystal On Sili- con) achieves high brightness, high contrast ratio, and smooth and beautiful lattice-free images. High Brightness of 3500 Lumen (SX6/X600) This projector provides high brightness of the best-in-class* 3500 lumen.
Page 6: Supplied Manuals And Symbols Used In This Manual
Supplied Manuals User’s Manual (This Document) This is a universal manual for the projector, SX6/SX60/X600. This manual provides detailed information on how to use the projectors. Read this manual thoroughly to make the most of your projector and ensure safety.
Page 7: Safety Instructions
Safety Instructions Before operating this projector, read this manual thoroughly in order to operate the projector properly. This projector offers many convenient features and functions. Operating the projector properly enables you to manage those features and maintain it in good condition for a long period.
Page 8: Safety Precautions
Safety Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. This projector projects intense light from the projection lens. Do not stare directly into the lens if possible, as doing so may result in eye damage. Be especially careful that children do not stare directly into the beam.
Page 9 READ AND KEEP THIS OWNER'S MANUAL FOR LATER USE. All the safety and operating instructions should be read before beginning to operate the product. Read all of the instructions given here and retain them for later use. Unplug this projector from the AC power supply before cleaning.
Page 10 Never push objects of any kind into this projector through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind onto the projector. Do not install the projector near the ventilation duct of air-conditioning equipment.
Page 11: Ac Power Cord Requirement
50 and following of Italian legislative decree 22/97. For more information regarding return and recycling of WEEE products, please visit www.canon-europe.com/environment. (EEA: Norway, Iceland and Liechtenstein)
Page 12: Federal Communication Commission Notice
If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon Plaza, Lake Success, NY 11042, U.S.A. Tel No. (516) 328-5600 Canadian Radio Interference Regulations This Class B digital apparatus meets all requirements of the Canadian Interference- Causing Equipment Regulations.
Page 13: Lamp Handling Precautions
If you inhale the gas or the shards of the broken lamp contact your eyes or mouth, consult a doctor immediately. If a lamp explodes, its shards may scatter inside the projector. Ask the Canon service representative to clean and check the inside of the projector and replace the lamp.
Page 14: Installation Precautions
Installation Precautions Ensure that the projector is installed with a minimum distance of 1 m (3.3') from its left, right, rear, and top panels to the neighboring object such as a wall. Installation Install the projector correctly. Incorrect installation may cause troubles and accidents. 20°...
Page 15: Table Of Contents
Table of Contents Quick Reference – How to start projection............. 2 Features of the Multimedia Projector SX6/SX60/X600 .......... 4 Supplied Manuals and Symbols Used in This Manual ........... 5 Supplied Manuals......................5 Safety Instructions....................6 Safety Precautions..................... 7 AC Power Cord Requirement ..................10 Federal Communication Commission Notice ..............
Page 16 Pointing with a Spotlight ....................68 Zooming an Image ......................69 Operating a Mouse with the Remote Control ..............70 Page Up or Down through the Pages ................71 Setting Up Functions from Menus ................ 74 How to Use Menus ......................74 Setting Display Status from the Display Settings Menu ........
Page 17 Enabling/Disabling the Beep..................97 Prohibiting the Projector Operation ................98 Selecting a Display Language ..................98 Enabling/Disabling the Guide Message................. 99 Turning On/Off the LED Illumination................100 Setting up the Remote Control ..................100 Setting up the Digital Video Input Signal ..............101 Setting a Password.......................
Page 18: Before Use
Safety Instructions Before Use Setting Up the Projector BEFORE USE Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 19: Before Use
Before Use Supplied Accessories Check whether the following accessories are supplied with the projector. Remote control Batteries (type AAA, two) Computer connection cable for remote control (DVI/Mini D-sub, 15-pin) (1.8m/5.9') [YH7-2052] Power cord (2m/6.6') USB cable (1.8m/5.9') Component cable [YH7-2054] (RCA/Mini D-sub, 15-pin) (0.4m/1.3') [YH7-2084] For Continental...
Page 20 Installing the Lens Cap As shown in the illustration on the right, let the lens cap strap through the hole on the lens cap, and then the lens cap strap insertion hole. When the projector is not in use, attach the lens cap to protect the lens from dust and other foreign objects.
Page 21: Part Names
Part Names Main Unit of Projector Front Side Infrared Remote Receiver (P26) Terminals and Connectors Ranging Window place obstacle between the projector and the screen, as the auto focusing func- tion may fail to operate correctly. Be sure to remove the lens cap during projection.
Page 22 Bottom Side Do not block the air intake. Failure Lens Cap Strap Adjustable Foot (P38) to do so will result in malfunctions Insertion Hole or fire hazards. Air Intake Vent Lamp Cover (P109) Rear Adjustable Foot (for fine adjustment) Air Filter (P107) Mounting the Projector on the Ceiling You can mount the projector on the ceiling.
Page 23 Buttons on the Remote Control and Top Control Remote Control This projector can be operated using but- tons on the remote control or the top con- trol on the main unit. The remote control allows you to operate all functions of the projector. (10) (1) Infrared Remote Emitter Sends a signal to the infrared remote...
Page 24 Top Control (11) (12) (10) (10) POINTER button (P75) (17) NO SHOW button (P66) Selects the upper, lower, left, or right Turns the picture into a black image. item in the menu. Also moves the (18) MUTE button (P66) mouse cursor under the USB connec- Mutes the sound.
Page 25 Indicators on the Top Control Top Control (1) POWER indicator (P35, 53, 96) Indicates the projector status. Red: The projector can be turned on. Flashing red: The projector is being turned off (the lamp is being cooled). Green: The projector is on. Flashing green: The projector is being turned on.
Page 26 Input Terminals on Main Unit (9): (1) Input Terminal-1 (DIGITAL IN/ANALOG IN-1) (P32, 33, 57) Receives a digital (DIGITAL PC) and analog PC signal (ANALOG PC-1). Receives a digital content image signal (DIGITAL VIDEO). (2) Input Terminal-2 (ANALOG IN-2) (P32, 33, 56) Receives an analog PC signal (ANALOG PC-2).
Page 27: Preparing The Remote Control
Preparing the Remote Control Installing Remote Control Batteries Open the battery com- Insert batteries. Replace the compart- partment lid. Insert new two AAA-size ment lid. Slide the lid with it batteries in the compart- pressed down. ment with the + and - poles positioned cor- rectly.
Page 28 Safety Instructions Before Use Setting Up the Projector SETTING UP THE Projecting an Image from the Computer PROJECTOR Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 29: Setting Up The Projector
Setting Up the Projector Determining the Distance to the Screen The projected image size is determined by the distance between the projector lens and the screen. Select the place where the desired image size is obtained according to the illustra- tion shown below.
Page 30: Determining The Installation Position
Determining the Installation Position Placing in Front of the Screen Place the projector perpendicular to the screen Screen as far as possible. A slight error in the projection angle can be corrected using the [KEYSTONE] button (P47). Optical axis Placing on a Level Place Place the projector on a level place as far as pos- sible.
Page 32 Safety Instructions Before Use Setting Up the Projector PROJECTING AN Projecting an Image from the Computer IMAGE FROM Projecting an Image from AV Equipment THE COMPUTER Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 33: Projecting An Image From The Computer
Projecting an Image from the Computer Connecting the Projector to the Computer Connect the projector to the computer. Connecting to Video Terminals Supplied computer connection cable VGA cable To monitor output terminal To monitor output terminal (mini D-sub 15-pin terminal) (mini D-sub 15-pin terminal) Computer Computer...
Page 34 It may project an image inappropriately when projecting the digital PC signal in 1280 x 1024 or 1400 x 1050 depending on the type of computer or DVI cable (SX6/SX60). The USB terminal is used to use the remote control as the computer mouse. An image can-...
Page 35: Connecting To An External Monitor
Connecting to an External Monitor Connecting to Audio Terminals You can display an image from the projec- Connect an audio cable between the pro- tor to an external monitor. jector and computer if you want to use the projectors speaker. VGA cable Audio cable AUDIO OUT terminal...
Page 36: Starting Projection
Starting Projection Connect the power cord and turn on the projector to start the projection. Once the projector is turned off, it cannot be turned on for a while. Wait until the lamp is cooled down and the [POWER] indicator lights in red. Connect the power cord.
Page 37 Connect the Ground Terminal Connect the ground terminal on the power plug to ground. Otherwise, the operating computer may suffer electromagnetic radiation problems and poor reception by TV and Caution radio. Unplug the Power Cord When the Projector is Not in Use The projector constantly consumes approximately 7W power even when it is turned off.
Page 38: Adjusting The Image
Adjusting the Image Adjusting the Image Size (ZOOM). Adjust the image size in accordance with the screen. Press the [ZOOM] button. The Zoom adjustment window appears. Adjust the image size. Zoom in: Press [ ] for rough adjustment. Press [>] for fine adjustment. Zoom out: Press [ ] for rough adjustment.
Page 39: Adjusting The Projection Angle
Adjusting the Projection Angle You can adjust the projection angle with the adjustable foot. Lift the front side of the projector and push the adjusting foot lock button. The adjustable foot extends. Adjust the projection angle while pushing the adjustable foot lock button, and then release the lock button.
Page 40: Preparing The Computer
("1024 x 768 pixels" or less for X600) 4. Close the windows. For SX6/SX60 If the display resolution of the computer is set to SXGA (1280 by 1024 dots) or WXGA (1280 by 768 dots), it is recommended to select [True size] as the screen mode (P78).
Page 41 Projecting the Image from the Notebook Computer Most of notebook computers require to turn on the external monitor output to project an image from the projector. To turn on the external monitor output, press the [LCD] or [VGA] function key ([F1] to [F10]) or a key with an icon for the external monitor while pressing the [Fn] key on the keyboard.
Page 42: Performing The Auto Setup
Performing the Auto Setup With the auto setup function, the following set of adjustments is performed automatically when projecting an image from a computer. You can start the projection only with this oper- ation if the input signal has been appropriately selected. Auto focus Adjusts the focusing automatically.
Page 43 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. You can perform this step by selecting [OK] with the [<] button, and then pressing the [OK] button.
Page 44 Selecting an Input Signal You can select an input signal type. Select an input signal from the followings: ANALOG PC-1 : Analog signal Connecting with a DVI/Mini D-sub 15-pin cable (supplied cable) DIGITAL PC : Digital signal Connecting with a DVI digital cable ANALOG PC-2 : Analog signal Connecting with a VGA cable or 5-BNC cable Select an appropriate input signal before starting the auto setup function by following the steps below if you change the input signal due to changing the connection to the computer...
Page 45 If the target input signal is unavailable from the list at the left, press the [>] button, and then press the [ ] / [ ] button to select the target input signal from the list at the right. Press the [OK] button.
Page 46 Selecting ANALOG PC-2 Select [ANALOG PC-2] for Input Terminal-2. Press the [INPUT] button. The [INPUT] window appears. Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from above. You can select any input signal type from all options through the [ ] / [ ] button. If the ANALOG PC-2 is unavailable from the list at the left, press [>], and then press [ ] / [ ] to select the ANALOG PC-2 from the list at the right.
Page 47: Adjusting The Focus
Adjusting the Focus You can adjust the focus. Follow the steps below to adjust the focus manually if the Auto setup function (Auto focus) does not adjust the focus appropriately. Press the [FOCUS] button. The Focus adjustment window appears. Press the POINTER buttons to adjust the focus. Rough adjustment: [ ] [ ] Fine adjustment : [<] [>] You can activate the Auto focus function if you press the [AUTO SET] button now.
Page 48: Adjusting Keystone Distortion
Adjusting Keystone Distortion The Auto setup function (Auto keystone) automatically adjusts the keystone distortion in a longitudinal direction. Follow the steps below if the function does not adjust the distortion appropriately or you want to adjust the keystone distortion in a horizontal direction. Press the [KEYSTONE] button.
Page 49 Press the [OK] button. The result of keystone adjustment is memorized. If you place the projector at the same posi- tion, the keystone adjustment is not necessary. When the Keystone adjustment is selected, signals are processed digitally. The image may look different from the original one.
Page 50: Setting Up The Computer Screen Automatically (Auto Pc)
Setting Up the Computer Screen Automatically (AUTO PC) This projector automatically makes optimum settings for the total number of dots and track- ing depending on a signal type (SXGA+, XGA, etc.). The auto PC adjustment function does not need to be performed if the projector is project- ing an image properly with [AUTO SETUP].
Page 51: Selecting An Image Mode (Image)
You can select an image mode depending on the projecting image. You can also adjust the image quality (sharpness, gamma, color correction, etc.) as you like. Press the [IMAGE] button. (SX6) The Image mode window appears. The selection is toggled among following modes by pressing the button.
Page 52 You can adjust the followings for each image mode. For detailed information on the proce- dures, refer to "Image Adjustment Menu" (P89 to 95). Brightness Adjust this when the image is too bright or dark. Contrast Adjust this to decrease or increase contrast of the entire image. Sharpness Adjust this to soften or sharpen an image.
Page 53: Selecting A Screen Mode (Aspect)
Selecting a Screen Mode (Aspect) You can select one of four screen modes depending on the aspect ratio or display resolu- tion of your computer. You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P78). Full screen Select this to project a computer screen with aspect ratio of 4:3 (SXGA+ [1400 by 1050 dots] or XGA [1024 by 768 dots]).
Page 54: Turning Off The Projector
Turning Off the Projector You may shorten the lamp life if turning off the projector while its lamp is still in an unstable state shortly after turning on the projector. Wait at least 5 minutes before turning off the pro- jector.
Page 55: Setting Up The Power Management Function
You can carry the projector immediately after the use ("Off & Go" function). You can turn off the projector by disconnecting the power cord without pressing the [POWER] button (direct power on). (P97) The LED illumination lamp turns on to indicate the lamp is being cooled when the power cord is connected.
Page 56 Safety Instructions Before Use Setting Up the Projector PROJECTING AN Projecting an Image from the Computer IMAGE FROM Projecting an Image from AV Equipment AV EQUIPMENT Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 57: Projecting An Image From Av Equipment
Projecting an Image from AV Equipment Connecting the Projector to an AV Equipment Connect the projector and AV equipment. Connecting to Video Terminals Supplied component cable SCART cable (SCART terminal) AV equipment AV equipment Video output terminal (RCA terminal) (D terminal) Commercial Commercial Component...
Page 58 Digital cable S-VIDEO cable You can project digital content via the HDMI or DVI terminal. S-VIDEO output terminal (S-VIDEO OUT terminal) AV equipment AV equipment Digital video output terminal (HDMI terminal) (DVI terminal) Commercial S-VIDEO video cable Commercial HDMI adapter cable Commercial DVI cable S-VIDEO input Projector...
Page 59 Video cable Video output terminal (VIDEO OUT terminal) AV equipment Commercial Video cable Video input Projector terminal (VIDEO IN) INPUT Signal: [VIDEO] is selected automati- cally...
Page 60: Projecting A Video Image From An Av Equipment
Projecting a Video Image from an AV Equipment You can project a video image with the steps similar to those for projecting an image from a computer. This section provides information specific to the projection from an AV equipment. For more detailed information for each step, refer to the corresponding page. Turn on the projector.
Page 61: Performing The Auto Setup
Performing the Auto Setup With the auto setup function, the following set of adjustments is performed automatically when projecting a video image from an AV equipment. You can start the projection only with this operation if the input signal has been appropriately selected. Auto focus Adjusts the focusing automatically.
Page 62 Press the [AUTO SET] button again. One or more functions highlighted in black are performed automatically. You can perform this step by selecting [OK] with the [<] button, and then pressing the [OK] button. Selecting an Input Signal Select [DIGITAL VIDEO] among the following 4 input signals by following the steps shown in the "Selecting DIGITAL VIDEO"...
Page 63 Select the top item in the menu with the [INPUT] button. The selection is toggled through available input signal types from above. You can select any input signal type from all options through the [ ] / [ ] button. If [DIGITAL VIDEO] is unavailable from the list at the left, press [>], and then press [ ] / [ ] to select it from the list at the right.
Page 64 Selecting SCART Select [SCART] for Input Terminal-2. Press the [INPUT] button. The [INPUT] window appears. Select the second top item in the menu with the [INPUT] button. The selection is toggled through available input signals from above. You can select any input signal type from all options through the [ ] / [ ] button. If the SCART is unavailable from the list at the left, press [>], and then press [ ] / [ ] to select the SCART from the list at the right.
Page 65: Selecting A Screen Mode (Aspect)
Selecting a Screen Mode (Aspect) You can select one of three screen modes depending on the aspect ratio of your AV equip- ment or content software. You can specify the aspect ratio from the menu. Refer to [Aspect] in the menu (P78, 79).
Page 66: Useful Functions
Safety Instructions Before Use Setting Up the Projector USEFUL Projecting an Image from the Computer FUNCTIONS Projecting an Image from AV Equipment AVAILABLE Useful Functions Available During a Presentation DURING A Setting Up Functions from Menus PRESENTATION Maintenance Troubleshooting Appendix Index...
Page 67: Useful Functions Available During A Presentation
Useful Functions Available During a Presentation Blackened Out an Image Muting the Sound Temporarily Useful when: Useful when: You finished the presentation. You want to immediately mute the sound You want to divert attendees' attention from the projector. from the screen. Blacken out the image temporarily.
Page 68: Freezing The Picture
Freezing the Picture Adjusting the Volume Useful when: Useful when: You want to perform a computer opera- You want to adjust the volume level of tion which is irrelevant to the proceed- the projectors speaker. ings of the presentation. You want to stop a moving image. Adjusting the Volume Freeze the moving image.
Page 69: Showing The Elapsed Time
Showing the Elapsed Time Pointing with a Spotlight Useful when: Useful when: You want to manage the proceedings of You want to point to a portion of an the presentation. image that should draw attendees' attention. The elapsed time from 00:00 to 59:59 is displayed at the lower right corner of the Highlight a desired portion of the projected screen.
Page 70: Zooming An Image
Zooming an Image Useful when: Zoom in an object such as a small Moving an Image to the Desired Position graph during a presentation. If the image you want to zoom in stays out Moving unnecessary information off the of the screen or out of the center of the screen to focus on the current subject.
Page 71: Operating A Mouse With The Remote Control
Operating a Mouse with the Remote Control Useful when: You want to operate a mouse with the This function is supported on Windows remote control. XP, Windows 2000, Windows Me, or Mac OS 9.2 and later. You can use the supplied remote control as the wireless mouse for your computer.
Page 72: Page Up Or Down Through The
Page Up or Down through the Pages Useful when: You want to page up or down through the projected application pages with the remote control. You can page up or down in the projected application with the supplied remote con- trol.
Page 74 Safety Instructions Before Use Setting Up the Projector SETTING UP Projecting an Image from the Computer FUNCTIONS Projecting an Image from AV Equipment FROM MENUS Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 75: Setting Up Functions From Menus
Setting Up Functions from Menus How to Use Menus Some of the projector's function are used through the menu screen. It consists of following three menus. Display settings menu (P78) This menu is used to select an input signal and make various settings related to display.
Page 76 This section provides the basic operation on the menu. Press the [MENU] button. A menu window appears. Press the [MENU] button again to close the menu window. Image adjustment tab (Image adj.) Press [<] / [>] to select the appropriate tab. Display settings System settings Press [ ] to move the cursor on the tab if it is...
Page 77 Set the menu item. There are four types of menu items that you make a setting: Directly From a list With a slider In a different screen Directly From a list Example: Tracking Example: Aspect Press [<] [>] to increase/decrease Press the [OK] button to display a the setting.
Page 78 Press the [OK] button. In some menu items, the setting is enabled just by making a selection. Press the [MENU] button when you finish. The menu disappears.
Page 79: Setting Display Status From The Display Settings Menu
Setting Display Status from the Display Settings Menu Selecting a Screen Mode (1) Selecting a Screen Mode (2) [Aspect] [Aspect] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP. You can adjust the aspect ratio of the image pro- You can adjust the aspect ratio of the image pro- jected on the screen.
Page 80: Selecting A Screen Mode (3)
Setting Display Status from the Display Settings Menu Selecting a Screen Mode (3) Selecting an Input Signal Type (1) [Aspect] [Input signal select] VIDEO/S-VIDEO SCART ANALOG PC You can adjust the aspect ratio of the image pro- You can select a desired input signal type if the jected on the screen.
Page 81: Selecting An Input Signal Type (2)
Selecting an Input Signal Type (2) Selecting an Input Signal Type (3) [Input signal select] [Input signal select] VIDEO/S-VIDEO COMP./SCART You can select an input signal type manually if a You can select an input signal type manually if a video image from a AV equipment is not pro- video image from a AV equipment is not pro- jected correctly (irregular color or no image).
Page 82: Adjusting The Total Number Of Dots
Setting Display Status from the Display Settings Menu Adjusting the Total Number of Dots Adjusting the Tracking [Total dots] [Tracking] ANALOG PC ANALOG PC You can adjust the total number of dots in the You can adjust the tracking when the projected horizontal direction.
Page 83: Adjusting The Horizontal Position
Adjusting the Horizontal Position Adjusting the Vertical Position [Horizontal position] [Vertical position] ANALOG PC ANALOG PC You can adjust the horizontal position of the You can adjust the vertical position of the screen screen when the projected image is shifted in when the projected image is shifted in the verti- the horizontal direction.
Page 84: Adjusting The Number Of Horizontal Pixels
Setting Display Status from the Display Settings Menu Adjusting the Number of Horizontal Pixels Adjusting the Number of Vertical Pixels [Horizontal pixels] [Vertical pixels] ANALOG PC ANALOG PC You can adjust the number of the pixels in the You can adjust the number of the pixels in the horizontal direction if the length of the screen is vertical direction if the length of the screen is too too long or too short in the horizontal direction.
Page 85: Performing Progressive Processing
Performing Progressive Processing Selecting a Menu Position [Progressive] [Menu position] DIGITAL PC ANALOG PC COMP. VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can use the progressive processing function You can select the position of the menu dis- if you want to project a high-quality video image. played on the screen.
Page 86: Performing The Ceiling-Mounted/Rear Projection
The projected image is inverted in the vertical direction. Press the [MENU] button when you finish. When hanging the projector from the ceiling, make sure to use optional brackets. Contact your Canon dealer.
Page 87: Correcting The Screen Color
Correcting the Screen Color Capturing a Logo to Be Projected [Screen color] [Logo capture] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the while balance so that white You can project a desired image (logo) when portions of the image are displayed correctly.
Page 88: Selecting A Logo Display Position
Setting Display Status from the Display Settings Menu Selecting a Logo Display Position Displaying a Logo (No signal screen) [Logo position] [No signal screen] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select a logo display position.
Page 89: Displaying A Logo (No Show)
Display settings Display settings User screen settings User screen settings NO SHOW Projector on Displays no logo (black screen). Displays the Canon logo captured Black Canon logo at the factory. Displays no logo (blue background). Blue Projects an image immediately after Skip turning on the projector.
Page 90: Setting The Image Quality From The Image Adjustment Menu
Press the [OK] button to confirm, and then press the [MENU] button. You can adjust the image quality (SX6) (brightness, contrast, etc.) for each Select this to project an image with Standard image mode as you wish. near-original quality and a high The projector stores the image quality regard for reproduction of white.
Page 91: Adjusting The Brightness
Adjusting the Brightness Adjusting the Contrast [Brightness] [Contrast] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the brightness of an image when You can adjust the contrast of an image if you it is too bright or dark.
Page 92: Adjusting The Sharpness
Setting the Image Quality from the Image Adjustment Menu Adjusting the Sharpness Making a Gamma Correction [Sharpness] [Gamma] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the sharpness when you want to You can make a gamma correction if light or make an image sharper or softer.
Page 93: Making Color Adjustment (1)
Making Color Adjustment (1) Making Color Adjustment (2) [Color adjustment] [Color adjustment] DIGITAL PC ANALOG PC VIDEO/S-VIDEO COMP. DIGITAL VIDEO SCART You can make color adjustment for each color You can adjust color level and color balance and (red, green, and blue). make color adjustment for each color (red, green, and blue).
Page 94: Making Advanced Color Adjustment (1)
Setting the Image Quality from the Image Adjustment Menu Making Advanced Color Adjustment (1) Making Advanced Color Adjustment (2) [Dynamic gamma] [Mem. color correct] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can adjust the gradation representation of You can correct colors (e.g.
Page 95: Making Advanced Color Adjustment (3)
Making Advanced Color Adjustment (3) Reducing the Lamp Brightness [6-axis color adjust] [Lamp mode] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can make fine color adjustment with the 6- You can reduce the lamp brightness if you want axis color adjustment box (RGB (red/green/blue) to make the image darker or reduce the fan and CMY (cyan/ magenta/yellow)).
Page 96: Resetting The Image Settings
Setting the Image Quality from the Image Adjustment Menu Resetting the Image Settings Performing [Color adjustment] or [Advanced [Reset] adjustment]: DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO A check mark ( ) appears on the Image Adjustment menu if you perform [Color You can reset the current image settings to the adjustment] [Advanced...
Page 97: Setting Various Function With The System Settings Menu
Setting Various Function with the System Settings Menu Setting Auto Setup Function Selecting the Power Management Mode [Auto setup] [Power management mode] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select an item you want to enable in the You can turn off the lamp or projector automati- auto setup function.
Page 98: Skip The Power Button Operation
Setting Various Function with the System Settings Menu Skip the POWER Button Operation Enabling/Disabling the Beep [Direct power on] [Beep] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can set the projector to be turned on when You can enable/disable the beep when you you connect the power cord.
Page 99: Prohibiting The Projector Operation
Prohibiting the Projector Operation Selecting a Display Language [Key lock] [Language] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can prohibit the use of the buttons on the You can select a language to be used in the top control or remote control to prevent them menu from 20 different languages.
Page 100: Enabling/Disabling The Guide Message
Setting Various Function with the System Settings Menu Enabling/Disabling the Guide Message [Guide] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can enable/disable the guide message Press the [OK] button and all words in the menu showing how to use the projector. will be displayed in the selected language.
Page 101: Turning On/Off The Led Illumination
Turning On/Off the LED Illumination Setting up the Remote Control [LED illumination] [Remote control] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can turn on/off the LED illumination lamp You can change the channel settings to prevent and the LEDs on the terminals (P24, 25).
Page 102: Setting Up The Digital Video Input Signal
Setting Various Function with the System Settings Menu Setting up the Digital Video Input Signal Setting a Password [Digital video] [Password settings] DIGITAL PC ANALOG PC DIGITAL VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can select the standard of the digital video You can set a password to the projector.
Page 103: Registering A Password
Registering a Password Resetting the Lamp Counter [Register password] [Lamp counter] DIGITAL PC ANALOG PC DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can register a password that you need to You can reset the lamp counter that indicates the enter when turning on the projector.
Page 104: Resetting To The Factory Defaults
Setting Various Function with the System Settings Menu Resetting to the Factory Defaults [Factory defaults] DIGITAL PC ANALOG PC DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO You can reset the menu item settings and restore Press the [OK] button to confirm, and then press the system settings to the factory defaults.
Page 106 Safety Instructions Before Use Setting Up the Projector MAINTENANCE Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 107: Maintenance
Maintenance Cleaning the Projector Clean the projector frequently to prevent dust from settling on the surface. A dirty lens may ruin the quality of the projected image. The main unit is very hot immediately after turning off the projector. Wait until the pro- jector cools down sufficiently before cleaning the projector.
Page 108: Cleaning And Replacing The Air Filter
Cleaning and Replacing the Air Filter An air filter is installed in the air intake vent on the bottom of the main body to protect the internal lens and mirror from dust. Should the air filter become clogged with dust, the pro- jector may be damaged since it will block the air flow into the projector and raises the inter- nal temperature of the projector.
Page 109: Replacing The Lamp
Do not remove screws unless specified. Replacing Lamp This projector uses the following lamp. Lamp type No. SX6/X600: RS-LP02 SX60: RS-LP03 Be sure to use the specified lamp. A lamp can be ordered from your dealer or Canon home page.
Page 110 Replacing the Lamp Lamp cover Turn off the projector, disconnect the power plug from the AC outlet, and then let the pro- jector stand for at least 1 hour. Loosen a screw with a flathead screwdriver and remove the lamp cover. Screw Screw Loosen two screws, pull up the handle, and...
Page 112 Safety Instructions Before Use Setting Up the Projector TROUBLE- Projecting an Image from the Computer SHOOTING Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 113: Troubleshooting
Troubleshooting WARNING Lamp Flash Patterns The WARNING lamp on the Control Panel flashes in red when there is a trouble in the pro- jector. Turn off the projector, wait until the cooling fan stops, and remove the power plug from the AC outlet before dealing with the trouble.
Page 114: Symptoms And Solutions
Symptoms and Solutions You cannot turn on the projector. Cause Countermeasure The power cord is not connected Check whether the power cord is connected correctly (P35). correctly. The power cord has just been con- You cannot turn on the projector until the [POWER] indicator nected.
Page 115: You Cannot Hear Sound
You cannot hear sound. Cause Countermeasure The audio cable is not connected Check the cable connection of the audio cable (P34). correctly. The [MUTE] function is enabled. Press the [MUTE] button on the remote control (P66). The volume level is adjusted to the Press the [VOL+] button on the remote control or top control to minimum.
Page 116: The Projector Is Forced To Be Turned Off
You cannot project an image from a notebook computer. Cause Countermeasure The connection cable is not con- Check whether the connection cable is connected to the nected correctly. video terminal of the computer correctly (P32, 33). The video signal type is incorrect. Check whether the selected signal type is correct (P78, 79, 118).
Page 117: You Cannot Operate The Remote Control
You cannot operate the remote control. Cause Countermeasure Batteries are not installed properly Check whether batteries are installed correctly. If batteries are or they have run out. installed correctly, replace them with new batteries (P26). You are operating the remote con- Check whether you are operating the remote control within the trol from the outside of the remote remote control operating range.
Page 118 Safety Instructions Before Use Setting Up the Projector APPENDIX Projecting an Image from the Computer Projecting an Image from AV Equipment Useful Functions Available During a Presentation Setting Up Functions from Menus Maintenance Troubleshooting Appendix Index...
Page 119: Appendix
640 x 480 37.861 72.81 D-SXGA* 1280 x 1024 63.981 60.02 37.861 74.38 D-SXGA+* 1400 x 1050 63.981 60.02 43.269 85.01 Only for SX6/SX60 720 x 400 31.469 70.09 34.50 55.38 35.156 56.25 DIGITAL VIDEO 37.879 60.32 37.898 61.03 Signal Horizontal frequency...
Page 120: Relationship Between Screen Size And Projecting Distance
Relationship between Screen Size and Projecting Distance Screen size at 4:3 Projecting distance at (m) Screen size at 16:9 aspect ratio H1 (cm) H2 (cm) aspect ratio Max. zooming Min. zooming Type – W x D (cm) Type – W x D (cm) 40"...
Page 121: Glossary
Connect the composite output reproduction since Its has wider color (RCA) terminal on the AV equipment and gamut than sRGB. In SX6, if you select the VIDEO IN terminal on this projector [AdobeRGB] in the [Image mode] setting, with a video cable. Select [VIDEO] at pro- the projector can project the best-quality jection.
Page 122 Content Protection which is an encryption resolution of the image. Turn off the pro- technology for copy protection of digital gressive function when flickering and hori- image signals. In SX6/SX60/X600, you can zontal lines are noticeable on a fast- project digital contents copy-protected moving picture.
Page 123 An international standard of color repre- sentation (color space) which is applied to general digital cameras, displays and oth- ers. In SX6/SX60/X600, if you select [sRGB] in the [Image mode] setting, the projector can project the best-quality image conforming to the sRGB Standard.
Page 124: Specifications
0.7" x 3 panels/4 : 3 Drive system active matrix system Number of pixels/ SX6/SX60: 1,470,000 (1400 x 1050) x 3 panels/4,410,000 Total Number of pixels X600: 786,432 (1024 x 768) x 3 panels/2,359,296 Zoom ratio/Focal length/F value 1.7x/f=21.7 to 35.8 mm/F1.85 to F2.5...
Page 125: External View
External View Input terminal-2 (ANALOG IN-2) (Analog PC-2 input/component input terminal) This terminal is used as a computer analog PC input or component input terminal. Use a D- sub computer cable for connection. Mini D-sub 15-pin 6 Ground (R) 11 Monitor ID0 7 Ground (G) 12 DDC data 8 Ground (B)
Page 126: Index
Index Numerics 6-axis color adjust ........94 IMAGE ............ 50 Image adjustment menu ....74, 89 Image flip H/V ........85 Air filter ..........107 Image mode ........... 89 Aspect ........52, 64, 78 Image mode (quality) ....... 50, 89 AUDIO IN terminal .........
Page 127 Power management ....... 54 Power management mode ....54, 96 Progressive ..........84 Projection distance ......28, 119 Projector installation ......13, 29 Projector on ..........88 P-TIMER ..........68 Rear projection ......... 29, 85 Register password ....... 102 Remote control ......22, 26, 100 Reset ............
Page 128 Options Lamp Part No. Ceiling mounting pipe (760mm) SX6/X600:RS-LP02 Part No: RS-CL05* SX60: RS-LP03 Ceiling-mounting plate Part No: RS-CL02** Ceiling mounting bracket Part No: RS-CL06 DVI digital cable Part No: LV-CA29 Ceiling mounting pipe (360mm) SCART cable Part No: LV-CA31...
Page 129: Menu Configuration
Black Auto * Blue * NTSC User logo SECAM NO SHOW Black * NTSC4.43 Blue PAL-M User logo PAL-N Projector on Canon logo * COMPONENT Skip Auto * User logo 1080i 1035i Return 720p 575p 480p 575i 480i SCART 575i...
Page 130: The Image Adjustment Menu
The Image adjustment menu The System settings menu Image mode Standard * Auto setup Presentation Auto focus Movie (SX60/X600) On * Movie&Photo (SX6) Auto keystone AdobeRGB (SX6) On * Home Cinema (SX60) sRGB Auto input On * Brightness Contrast Auto screen color...
Page 131 30-2, Shimomaruko 3-chome, Ohta-ku, Industriestrasse 12, 8305 Dietlikon, Tokyo 146-8501, Japan Switzerland CANON U.S.A., INC. CANON BELGIUM N.V./S.A One Canon Plaza, Lake Success, NY 11042, Bessenveldstraat 7, 1831 Diegem, Belgium U.S.A. CANON GmbH CANON CANADA, INC. Zetschegasse 11, A-1232 Wien, Austria 6390 Dixie Road Mississauga, Ontario L5T CANON ESPANA S.A.

This manual is also suitable for:

Sx60 X600

Canon SX6 User Manual

Quick Reference - How to Start Projection

Features of the Multimedia Projector SX6/SX60/X600

Supplied Manuals and Symbols Used in this Manual

Safety Instructions

Table of Contents

Before Use

Setting up the Projector

Projecting an Image from the Computer

Projecting an Image from AV Equipment

Useful Functions Available During a Presentation

Setting up Functions from Menus

Setting Display Status from the Display Settings Menu

Setting the Image Quality from the Image Adjustment Menu

Setting Various Function with the System Settings Menu

Maintenance

Troubleshooting

Appendix

Index

Menu Configuration

Quick Links

projector lamp

Related Manuals for Canon SX6

Summary of Contents for Canon SX6

This manual is also suitable for:

Table of Contents