Key/Emulation Function; Details Of Command - Canon REALiS SX6 User Manual

User Command Specifications

1 9. Details of command

9. Details of command
Descriptions of each command are provided starting from the next page.
The command descriptions have the format shown below.
* Alphabetic command name
Commands
Function * This briefly describes the command function.
Format * This indicates the command format.
Parameter * This explains the required parameters for the command.
Response * This describes the command response.
Description * This includes the command function, conditions, and notes.
Example * This provides command usage examples.
Commands
SX50
supported
01.****
○
Indicated here are the commands supported by each model (and user command version). "O": supported; "x":
*
not supported.
Supported Command States
Model Power
OFF ON PM D-RGB A-RGB1
×
× ○ ×
"○" when the power supply state is enabled while power management is in standby. Input signal is required when "×".
"○" when power supply state is ON.
"○" when power supply state is OFF.
SX6 SX60 X600
11.**** 11.**** 11.****
○ ○ ○
* This defines the environments that support the command (power supply state, input signal
state, control mode).
Input
A-RGB2 Comp Video S-Video
× ×
○ ○ ○
The command is enabled in states marked by "○".
Mode Control Setting Reference
D-Video SCART None Remote
× × ×
○
The command is enabled
in control modes marked
by "○".
PAGE 13
9. Details of command
※Command type
Parameter types
Mode
Remarks
Local
×
○