Range Fstepdrv - Canon REALiS SX6 User Manual

User Command Specifications
1

RANGE FSTEPDRV

RANGE FSTEPDRV
Commands
Function Focus lens step drive control option request
Format RANGE□FSTEPDRV
Response r:FSTEPDRV=I, <Setting option 1>, <Setting option 2>, ..., <Setting option n>
For all other responses, refer to
Description This command is used to inquire about the parameter options which enable the step drive of the focus lens.
(1) This inquiry can be made when the projector is in both the remote mode and power-on status at
the same time.
However, a "busy" response is given if the zoom or focus lens is being driven
（ Refer to the
(2) Step control for the focus lens can be exercised using the
Example > RANGE FSTEPDRV
< r:FSTEPDRV=I, FAR, NEAR
SX50
Commands
supported ０１．００**
×
When a command is not supported, "e:000A INVALID_PARAMETER" is returned.
Supported Command States
Model Power supply
OFF ON PM
D-RGB A-RGB1 A-RGB2 Comp
SX50
－ － － －
SX6
× ○ × ○
SX60
X600
*If a state is not supported, "INVALID_MODE" or "NOT_POWER_SUPPLIED" is returned with the Err response.
*When the power supply state is in the process of switching, an "i:BUSY" reply may be sent.
"Error List."
ZCONTDRV command and FCONTDRV command.
SX6 SX60 X600
０１．０１** ０１．０１** ０１．０１**
○ ○ ○
Input
Video S-Video D-Video SCART
－ － － － －
○ ○ ○ ○ ○
Mode Control Setting
.
）
FSTEPDRV command
.
Mode
None Remote
－ － － －
○ ○ ○ ○
PAGE 175
９．Details of command RANGE FSTEPDRV
Reference
ＩＤ
Remarks
Local
－
×