Advertisement
●HDBaseT cable and transmission distance
Theoretically HDBaseT is designed for data transmission of up to 100 meters in length however
depending on the type of network and transmitter used, the said length may not be met. This is likely
when signals with extensive data capacity are transferred. We recommend using shielded type
cables (TIA-specified CAT6 or CAT7 cable).
●Others regarding network transmission
Transmission speed of 100BASE-T/10BASE-T is supported on the HDBaseT network. On the
contrary, RJ-45 terminal exclusive for network use supports 1000BASE-T; thus the transmission
speed is slower when compared to RJ-45 terminal. The advantage of HDBaseT is the capability to
transfer video signal and network communication data simultaneously, which contributes to reducing
the number of cables.
Standby power for the projector setup and network setup will change accordingly:
Interface setup
HDBaseT
ON
ON
OFF
■ NMPJ1.3
Video data from the computer can be shared and distributed via network.
● The latest functions can be enjoyed with the Auto Update feature.
● Use DNS to search for a projector with its host name.
● Compatible with Windows 10
■ List of supported signals
The serial terminals conform to RS-232C. To control the projector with a PC, prepare communication
software and input data based on the following communication conditions and basic format.
<Serial input terminals>
● Pin array
Pin number
1
2
3
4
5
6
7
8
9
● Communication format
Communication method: RS-232-C asynchronous half-duplex communication
Communication speed: 19200bps
Character length: 8-bit
Stop bit: 2-bit
Parity: No
Flow control: No
Selection of a wired network
LAN port
HDBaseT
LAN port
Signal
OPEN
RxD
TxD
OPEN
GND
OPEN
OPEN
OPEN
OPEN
Network function
On (Eco)
2.0W
2.0W
0.7W
Off
1.9W
1.9W
0.3W
WUX6500 (12/14)
Advertisement
