Cleaning The Inside Of The Machine (Bottom Plate Cleaning) - Canon PIXMA MP960 Quick Start Manual

3
Clean the paper feed rollers.
(1) Select Settings on the HOME screen.
See "Basic Operation for the Operation Panel" on page 2.
The Settings screen is displayed.
(2) Select Maintenance, then press the OK button.
The Maintenance screen is displayed.
(3) Select Roller cleaning, then press the OK button.
The confirmation screen is displayed.
(4) Select Yes, then press the OK button.
The Paper Feed Rollers will rotate as they clean.
4
Repeat step 3 twice.
5
Open the Paper Output Tray, and then open the Output Tray Extension.
(1) Put your finger on the top of the Paper Output Tray and open it gently.
(2) Open the Output Tray Extension.
6
Load three or more sheets of A4 or Letter-sized plain paper in portrait orientation in
the paper source you selected in step 2.
7
Repeat step 3 three times.
The paper cleans the inside of the machine as it feeds through the machine.
If there are no signs of improvement after performing cleaning three times, contact a Canon
service representative.

Cleaning the Inside of the Machine (Bottom Plate Cleaning)

This section describes how to clean the inside of the machine. If the inside of the machine
becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.
Note
Make sure that the Inner Cover is closed.
1
Make sure that the machine is turned on, and then remove any paper from the Auto
Sheet Feeder.
2
Open the Paper Output Tray, and then open the Output Tray Extension.
(1) Put your finger on the top of the Paper Output Tray and open it gently.
(2) Open the Output Tray Extension.
3
Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then
unfold the paper.
Routine Maintenance 69