Gateway MX7118 Hardware Reference Manual page 45

www.gateway.com
Remove the bracket from the old drive.
13
Insert the new drive into the bracket with the label side up and so the
14
screw holes line up.
Replace the four screws that secure the bracket to the drive.
15
Slide the new hard drive kit into your notebook, then replace the screw
16
that secures the hard drive kit to your notebook.
Insert the battery, then turn your notebook over.
17
Connect the power adapter, modem cable, and network cable, then turn
18
on your notebook.
For instructions on installing Windows, your drivers, and your applications,
19
see the Recovering Your System chapter you printed in
Replacing the hard drive kit
Step 2.
41