CHAPTER 3: Maintaining and Upgrading Your Notebook
Replacing the hard drive kit
Tools Required
You need a small Phillips screwdriver to
replace the hard drive kit.
38
Secure the DVD drive with the two screws removed in
11
Insert the battery, then turn your notebook over.
12
Connect the power adapter, modem cable, and network cable, then turn
13
on your notebook.
If you would like more hard drive capacity, you can replace your original drive
with a higher-capacity drive.
To replace the hard drive kit:
Create a Drivers and Applications Recovery disc. For more information, see
1
"Creating Drivers and Applications Recovery discs" in the online User
Guide.
Print the "Recovering Your System" chapter from the online User Guide for
2
use in
Step
19.
Back up any data you want to transfer to the new hard drive. For more
3
information, see "Backing up files" in the User Guide.
Follow the guidelines under
4
page
34.
Turn off your notebook.
5
Disconnect the AC adapter, modem cable, and network cable.
6
Disconnect all peripheral devices and remove any PC cards.
7
Turn your notebook over so the bottom is facing up, then remove the
8
battery. For more information, see
www.gateway.com
Hard drive bay
"Preventing static electricity discharge" on
"Changing batteries" on page
Step
7.
29.