Gateway M280 Install Manual

Front
Speaker
Pen
Left
Power connector
Ethernet jack
Docking port
1
Install the battery
With the label side down, slide
the battery into the battery
compartment until it clicks.
Then lock it in place.
3

Connect to the Internet

(optional)
Connect the phone cord (included)
to the modem jack ( ) if using
dialup Internet access. Or connect
your Ethernet ( ) or USB ( )
cable (not included) if using high-
speed access.
LCD panel release latch
Memory card reader
Speaker
Headphone jack
Microphone jack
Monitor port
PC Card slot
IEEE 1394 port
USB ports
© 2005 Gateway, Inc. All rights reserved. Gateway and eMachines are trademarks or registered trademarks of Gateway, Inc. in the United States and other countries. All other brands and product names are trademarks or registered trademarks of their respective companies.
Back
Right
Modualr bay
2
Connect to AC power
Leave the AC adapter plugged in for
at least three hours the first time, so
the battery will fully charge.
4
Start the Convertible Notebook PC
Make sure that the Lock is in the up
postition. Press the power button,
then follow the on-screen instructions
to complete Windows setup.
Battery indicator
Power indicator
Kensington™ lock slot
Ventilation fan Modem jack
Caution: Do not block