Gateway 4535GZ Reference Manual page 129

Gateway 4535gz: reference guide
Hide thumbs Also See for 4535GZ:
Table of Contents

Advertisement

www.gateway.com
Important
Note any antenna placement constraints in the access point user
guide because the speed of a wireless network is related to signal
strength. Signal strength is affected by the distance between your
wireless network devices, by radio interference, and by interference from
natural obstructions such as walls, floors, and doors.
To check the signal strength:
1
Click
Properties. The Network and Sharing Center window
opens.
2
Click View status for the network connection. The
Wireless Network Connection Status dialog box
opens. The meter shows the signal strength for
wireless networking on your computer if other
computers with the same network name are within
range of your computer.
You are in a wireless network, you can see the network, but
cannot communicate, send files, print, or get to the Web
If your access point uses WEP, go to the Wireless
Networking Properties window and make sure that both
the WAP and the WLAN in the computer have matching
WEP keys.
You are in a wireless network, but no available networks
are listed in the Connect to a network dialog box
If the network you are attempting to access does not
broadcast its SSID, you need to request the SSID from the
administrator and add that network's information into
the wireless utility.
You may want to try entering ANY as the SSID, which
will make the computer try to auto-detect the network.
Your wireless network is listed as a preferred network, but
it has an "x" on it
An x means your preferred network is not currently
available or you are not currently in range to connect.
Internet Explorer is unable to access the Internet
Reset the power on your cable or DSL modem and your
access point. This reestablishes communication between
your Internet Service Provider and your modem and
between your modem and your access point.
If you previously accessed the Internet through a dial-up
modem, Internet Explorer may not be set up to access
the Internet through a network. Remove the dial-up
connection in the Internet Options in Internet Explorer.
(Start), right-click Network, then click
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents