Gateway 4535GZ Reference Manual page 108

11
12
13
14
15
16
17
18
19
20
102
CHAPTER 8: Upgrading Your Notebook
Remove the screws that secure the hard drive to the hard
drive cover.
Screw
Remove the cover from the old drive.
Insert the new drive label side up onto the cover so the
screw holes line up.
Replace the screws that secure the cover to the drive.
Slide the new hard drive kit into your notebook, then
replace the cover screws.
Insert the battery, then turn your notebook over.
Connect the power adapter, modem cable, and network
cable.
Turn on your notebook, open the DVD drive, insert the
Windows DVD, close the DVD drive, then restart your
notebook.
When the prompt "Press any key to boot from CD or DVD"
appears, press any key on your keyboard and follow the
on-screen instructions. As part of the process you may
be prompted to insert your Drivers and Applications
Recovery disc.
Reconnect all peripheral devices and replace any
PC Cards or Express Cards.
Screw
Screw
Screw