Replacing The Bezel; Technical Support; Safety, Regulatory, And Legal Information - Gateway 400SD4 Replacement Manual

Replacing the bezel

If the bezel was mounted incorrectly, complete the following procedure.
Warning
To replace the bezel:
1
Insert a small flat blade screwdriver under the bottom-right corner of the
keyboard bezel, between the I
2
Pull the bezel off the notebook. You will hear small snapping sounds as
the bezel comes off of the notebook. Be careful not to break off the tabs
located on the left end of the bezel.
3
Slide the two tabs on the left end of the bezel under the notebook frame
and press down on the bezel in several places until it clicks in place.

Technical Support

Refer to your user's guide for Gateway Technical Support information.

Safety, Regulatory, and Legal Information

Refer to your user's guide for important safety, regulatory, and legal
information.
© 2002 Gateway, Inc. All rights reserved. Gateway, Gateway Country, the Gateway stylized logo, and the
black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. in the United States and
other countries. All other brands and product names are trademarks or registered trademarks of their respective
companies.
If the bezel is not correctly replaced, your notebook could
be damaged when you try to close the LCD panel.
and D
NS
www.gateway.com
Replacing the Gateway 400 Keyboard
keys, and gently pry it up.
EL
11