Adding Or Replacing A Hard Drive - Gateway DX4200 Reference Manual

Adding or replacing a
hard drive
To add or replace a hard drive:
1
2
3
www.gateway.com
Tools
You need a Phillips screwdriver to add or replace a hard drive.
Remove the left side panel by following the instructions
in "Removing the left side panel" on page
Disconnect and label all hard drive cables, noting their
locations and orientation. (You will reconnect the cables
after you install the new drive.)
Drive data cable
If you are replacing a drive, remove the screws that
secure the hard drive to the hard drive cage, then slide
the old hard drive out of the cage.
35.
Drive power cable
Hard drive screws
47