Replacing The Memory Card Reader - Gateway DX4200 Reference Manual

Replacing the memory card
reader
To replace the memory card reader:
1
2
3
www.gateway.com
Tools
You need a Phillips screwdriver to replace the memory card reader.
Remove the front bezel by following the instructions in
"Removing the front bezel" on page
Firmly press the top bezel release tab. The release tab is
in the top of the case, between the power supply and the
optical drive.
Tip
The top bezel is the plastic piece that forms the top of your
computer case. You must remove it to perform maintenance on the
memory card reader.
Slide the top bezel toward the back of the computer
about 3/4 inch, then remove it from your computer.
37.
Top bezel release tab
45