Closing The Case; Replacing The Front Bezel - Gateway DX4200 Reference Manual

Gateway dx4200: reference guide
Hide thumbs Also See for DX4200:
Table of Contents

Advertisement

3

Closing the case

Replacing the front bezel

To replace the front bezel:
1
2
38
CHAPTER 4: Upgrading Your Computer
On the right side of the computer, press the three bezel
release tabs toward the outside until the bezel is
released, then pull the front bezel off the computer.
Caution
If the tabs were pressed correctly, the bezel should be easily
removed. If it does not move easily, make sure that the tabs have been
pressed far enough to release the bezel.
Bezel release tabs
Slide the tabs on the bezel into the slots on the front of
the computer until the tabs snap into place.
Replace the side panels that you removed previously by
following the instructions in
on page
39.
"Replacing the side panels"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents