Appendix C: Cellular Phone Dial-String Codes; Cellular Phone Dial-String Codes - Garmin NavTalk Pilot Pilot's Manual & Reference

C - Calling card PIN, insert where PIN should be used as
a DTMF string, the user enters PIN from the Phone
Setup page.
D - DTMF Tones, e.g. D728987 plays the DTMF tones
for 728987 when in a call.
L - Link telephone number, stops and moves to the
PhoneBook page, highlight a number and press
SEND, the number will be sent as a DTMF string.
P - Pause in dial string 5 seconds per "P" character
entered.
Q - Query Position, queries other phone for position,
also queries another phone for position from the
Dialing Page by selecting Query Location option.
This feature is active only during a call.
S - Stop dialing until SEND key is pressed.
T - Transmit GPS Position via DTMF tones, also transmit
position while in a call by holding SEND for two
seconds, also transmits position from the Dialing
Page by selecting the Send Location option.
This feature is active only during a call.
# - Provides a DTMF tone for automated phone services
when entered at the appropriate point in a dial string.
* - Provides a DTMF tone for automated phone services
when entered at the appropriate point in a dial string.
Appendix C
Cellular Phone
Dial-String
Codes
141