Table of Contents
Advertisement
The Last Dialed Page will display a scroll bar when
more names than can be displayed are listed on the page.
Whenever you place a call, the number is added to the
page and the oldest last dialed name or number is deleted
from the list whenever the page is filled with a maximum
of nine numbers. You can edit entries on this page by
pressing
to add a number to the PhoneBook,
MENU
remove it from the list, etc.
Call Timers
Call Timers are useful for recording the amount of
time of your last call, the total elapsed time for all calls
during a measured period of time, and the total lifetime
use of your NavTalk Pilot. You can also set the NavTalk
Pilot to signal each time a minute of your current call has
elapsed. It beeps at 50 seconds into the first minute and at
one minute intervals thereafter to help you save on
minute increment call billing. Last Call and Elapsed Time
are always active and can be reset through the Call Timers
function of the Main Menu.
1. Access the Main Menu by pressing the MENU key twice.
2. Scroll down to Timers and press ENTER to view
the timers page. On this page use the ARROW
keypad to move to the 'Calls' tab.
3. To reset the Last Call, Elapsed timers and turn the
Minute Timer on or off, highlight the selection and
press ENTER.
Refer to page 51 of the Phone Reference Section. The
Lifetime timer cannot be reset.
Section 3
Basic Phone
Operation
Last Dialed Name with
Time/Date Stamp
Last Dialed Edit Page
The Minute Timer
signals with 2 Short
Beeps every 60 Seconds
which cannot be heard
by other parties.
33
Advertisement
Table of Contents
