Edit A Route - Garmin NavTalk Pilot Pilot's Manual & Reference

Section 6
GPS Receiver
Reference
The Route Options
allow for easy editing
of an existing route.
To edit a route, highlight
the route waypoint that
is affected by the
change. If inserting a
waypoint, highlight the
existing waypoint after
the new waypoint.
114
To edit a route:
1. From the Route List, highlight the route you wish to
edit and press ENTER. The Route Plan Edit Page
appears for the selected route.
2. To change a route waypoint, highlight the waypoint
you wish to change and press ENTER. Use the
ARROW or phone keypad to enter the new
waypoint and press ENTER.
3. To review the information for a route waypoint,
highlight the desired waypoint and press MENU. A
pop-up menu appears with additional options.
Highlight 'Review Wpt' and press ENTER to display
the Waypoint Definition Page for the selected
waypoint.
4. To insert a waypoint in the route, highlight the
waypoint that will immediately follow the new route
waypoint and press MENU. A pop-up menu
appears with additional options. Highlight 'Insert
Wpt' and press ENTER to display a blank line for
the new waypoint. Enter the name of the new
waypoint and press ENTER.
5. To delete a waypoint from the route, highlight the
waypoint you wish to delete and press MENU.
Highlight 'Remove Wpt' on the pop-up menu and
press ENTER.
6. To reverse the order of waypoints in the route
highlight 'Invert' and press ENTER.
7. To begin navigating a route highlight 'Activate' and
press ENTER.
To edit a route from the map display:
1. Follow step 1 above to select the Route Plan Edit
Page, press MENU and select 'Show Map'.
2. To insert a new waypoint move the pointer to the
route leg in which the new waypoint will be placed
press ENTER, move the pointer to the new
waypoint location and press ENTER to insert the
new waypoint.
3. To remove a waypoint, move the pointer to the
waypoint, press MENU and select 'Remove Wpt'.