Table of Contents
Advertisement
Section 2
Getting
Started
Tour
Zoom/Volume
Keys
Power Key/
Backlighting
Adjustment
Volume Adjustment
Pop-Up
16
To Adjust Volume
The Zoom/Volume keys can be used to adjust the
ringer, beeper, and speaker volume on any page (other
than the GPS map and highway pages). Pressing these
keys will cause a pop-up menu to appear, showing sliding
indicators for each volume control. Each field must be
selected prior to changing volume settings.
1. Press a ZOOM/VOLUME key. When the pop-up
menu first appears the appropriate field is in edit
mode: beeper (no call), ringer (when phone is
ringing), and speaker (during a call).
2. Using the left and right arrow keys, move the
indicator to the left for less volume and to the right
for more volume.
3. To highlight a different field, use the up/down arrow
keys. Use left and right arrow keys to move the
indicator. Press QUIT to end or press no keys and
allow to time-out.
The volume levels are different when the unit is in the
airplane and car cradles. Volume is adjusted in the
appropriate cradle in exactly the same way, but can only
be done when in said cradle. When placed in the cradle,
the volume setting will return to the former level for that
cradle.
To Adjust Backlighting
The NavTalk Pilot' s three-level backlighting is
controlled with the PWR key and may be adjusted at any
time, from any page.
To turn the backlighting on:
1. Press PWR repeatedly until the backlighting is at
the desired level (off, 1, 2, or 3). Extended press of
the PWR key will shut the unit off.
Advertisement
Table of Contents
