Activating The Alarm; Setting The Sleep Timer; Warranty Registration; Using The Snooze Feature - Eton SOUND 100 Operation Manual

ACTIVATING THE ALARM

For the alarm to function it must be activated. To do this, use quick,
short presses of the radio's or the remote's ALARM button, causing
the following to appear in the display:
• ALARM with speaker symbol – wakes you up to a beeper sound.
• ALARM with musical note symbol – wakes you up to the last
radio station selected by either tuning or by selecting a memory.
• ALARM, speaker symbol and musical note symbol all disappear
from the display, thus deactivating the alarm completely.
WAKING TO A MEMORY PRESET
Tune to the memory preset of your choice, set the alarm time, activate
the alarm and place the Eton Sound Radio in standby mode.

USING THE SNOOZE FEATURE

Once the alarm activates, pressing the radio's or the remote's
SNOOZE allows cancellation of the alarm for 5 minutes; then the
alarm resumes. To completely cancel the snooze setting, press the
radio's or the remote's ALARM button.
6
All manuals and user guides at all-guides.com

SETTING THE SLEEP TIMER

The sleep timer enables play for a specified amount of time (15-90
minutes) and then shuts off. When the SLEEP function is enabled, the
main display shows the sleep symbol.
• To activate the sleep timer, turn on the radio and press the
radio's or the remote's SLEEP button with successive, quick, short
presses to select a sleep time of 15-90 minutes (15, 30, 45, 60, 75,
or 90). This setup mode is automatically exited after about 4 seconds.
• To deactivate the sleep timer, press the radio's or the remote's
SLEEP button with successive, quick, short presses to select OFF. This
setup mode is automatically exited after about 4 seconds.

WARRANTY REGISTRATION

To ensure full warranty coverage or product updates, registration of
your product should be completed as soon as possible after purchase
or receipt. You may use one of the following options to register your
product:
1. By visiting our website at http://www.etoncorp.com.
2. Mail in enclosed warranty card.
3. Mail your registration card or information to the following address;
Include your name, full mailing address, phone number, model pur-
chased, date purchased, retail vendor name and product serial num-
ber (typically located in or near the battery compartment):
Etón Corporation
1015 Corporation Way
Palo Alto, CA 94303 USA
ETON SOUN 100 OPERATION MANUAL
7