Ac Adaptor; Clock; Alarm Set; Alarm On/Off - Eton G1000A Operation Manual

BASIC OPERATIONS
continued
6. AC ADAPTOR (NOT INCLUDED)
The G1000A can be used with an AC adaptor that supplies an
output of 3 volts DC, negative polarity (center tip set to negative),
capable of supplying 100 milliamperes or greater current. Plug tip
diameters: 3.4 millimeters outer; 1.3 millimeter inner.

7. CLOCK

The clock displays time in 12 hour, AM/PM format.
While keeping the TIME SET button (14) pressed, set the correct
hour and minutes with the HOUR (7) and MINUTE (8) buttons.
They can be pressed with quick, short presses to advance slowly or
they can be kept pressed down to advance rapidly. When finished,
release the TIME SET button.

8. ALARM SET

While keeping the AL.SET button (15) pressed, set the
correct wake-up hour and minutes with the HOUR (7) and MINUTE
(8) buttons. They can be pressed with quick, short presses to
advance slowly or they can be kept pressed down to advance
rapidly. When finished, release the AL.SET button.
hour
15
14
8
minute
7
8
BASIC OPERATIONS
continued

9. ALARM ON/OFF

(ACTIVATING/DEACTIVATING THE ALARM)
Press the AL.ON/OFF (16) button. The alarm activation symbol
appears in the upper right corner of the LCD and looks like a
loudspeaker. When the loudspeaker symbol appears in the display,
the alarm is activated. When the loudspeaker symbol is not in
the display, the alarm is deactivated.
When the activated alarm turns the radio on, it can be turned off
by pressing the AL.ON/OFF button. This will cause the loudspeaker
symbol to disappear from the display.

10.LIGHT

The LIGHT button (9) causes the display to be illuminated. It will
turn off automatically after about 10 seconds. Note that using the
light feature decreases battery life.
16
G1000A OPERATION MANUAL
9
9