Memory Management - Roland TD-27 Manual

When fully loaded, the kits in this collection take up approximately 5% of the User Sample memory on the TD-27 module
across all three .TD0 files contained. Because of this, if you have many other presets by The eDrum Workshop or have
imported some of your own user samples, you may start to run out of space. Before installing, check that you have at least
6% of the User Sample memory remaining. You can check this by following these steps -
Check User Sample Memory
1) Press the [USER SAMPLE] button
2) Press [RIGHT] then [ENTER] to access the sample LIST
3) Look in the top right hand corner for the "REMAIN %"
and ensure that it is 6% or greater
If you do not have sufficient memory available to load these kits, you may need to delete some user samples. Before doing
so, it is recommended to create a full backup of your module data on to your SD card -
Full module backup
1) Ensure that your SD card is correctly inserted into the module
2) Press the [SYSTEM] button, then [RIGHT] and [ENTER] to access
the SD CARD menu
3) Ensure that you have SAVE highlighted, then press
[ENTER]
4) To save all user samples with your backup, ensure that
the With User Sample box is checked  with the dial
5) Press [DOWN] and select a bank number to save your
backup to - use a free slot to avoid overwriting a
previous backup
6) Press the [F5] SAVE button to progress to the next screen
7) Optionally, press the [F4] button to assign a memorable name to the backup (see pg. 25 of the TD-50 Reference Manual
for more information on the name editing process), then press [F5] to EXIT and return to the save screen
8) Press [F5] to EXECUTE your backup - you will be prompted to confirm, press [RIGHT] then [ENTER] to confirm
You can now delete any user samples you do not wish to keep from the User Sample LIST menu to make space,
knowing that you can LOAD the previous backup if any mistakes are made or you wish to restore the previous
settings.
Deleting User Samples
1) Press the [USER SAMPLE] button to access the menu
2) Press [RIGHT] then [ENTER] to access the sample LIST
3) Highlight the user sample you wish to delete and press
[F3] DELETE. You will be prompted to confirm, press
[RIGHT] then [ENTER] to confirm

Memory Management

7