Bowflex SelectTech 2080 Service Manual page 14

Some components of the machine can be heavy or awkward. Use a second person when doing the assembly steps involving these
parts. Do not do steps that involve heavy lifting or awkward movements on your own.
Note: Your machine may not match the images provided exactly.
1.
Turn both Adjustment Knobs to the number 20. Remove the barbell
assembly from the base and set it carefully on the floor.
2. Using a 3 mm hex wrench, loosen and remove the hardware that
attaches the Adapter Plate to the Selection Knob/Housing assembly. Set
the Adapter Plate and hardware safely aside for reassembly.
NOTICE: Hold the Adapter Plate and the end of the Barbell Handle
assembly so that they do not fall. This step may require
two people.
3.
Using a #2 Phillips screwdriver, remove the hardware that attaches
the Adjustment Knob to the Selection Housing. Set the hardware safely
aside for reassembly. Remove the Adjustment Knob and discard. Observe
the position of the Filler Insert.
Remove the Filler Insert and discard.
Filler insert
X4
3mm
14
X6
#2