Charging Your Gpsmap 620; Changing The Fuse On The Automotive Mount; Caring For Your Gpsmap 620 - Garmin GPSMAP 620 Owner's Manual

Charging Your GPSMAP 620

• Before using the GPSMAP 620 for the first time, charge the
battery for at least six hours.
• Place the GPSMAP 620 in either the automotive mounting
bracket or the marine mounting bracket with the bracket
connected to power. The vehicle or vessel key may need to be
turned to ON/ACC for the GPSMAP 620 to charge.
• Connect the included AC adapter to the GPSMAP 620 and a
wall outlet.
Changing the Fuse on the Automotive
Mount
CautioN: When replacing the fuse, do not lose any of the small
pieces and ensure they are put back in the proper place.
If your unit will not charge in your vehicle, you might need to
replace the fuse located at the tip of the vehicle adapter.
1. Unscrew the black, round end piece, and
remove it.
2. Remove the fuse (glass and silver cylinder),
and replace it with a 1.5 A fast-blow fuse.
3. Ensure that the silver tip is placed in the black
end piece. Screw on the black end piece.
GPSMAP 620 Owner's Manual

Caring for Your GPSMAP 620

Your GPSMAP 620 contains sensitive electronic components that
can be permanently damaged if exposed to excessive shock or
vibration. To minimize the risk of damage to your GPSMAP 620,
avoid dropping your unit and operating it in high-shock and high-
vibration environments.
Cleaning the Unit
The GPSMAP 620 is constructed of high-quality materials and
does not require user maintenance other than cleaning. Clean
the outer casing of the unit (not the touchscreen) using a cloth
dampened with a mild detergent solution, and then wipe it dry.
Avoid chemical cleaners and solvents that can damage plastic
components.
Cleaning the Touch Screen
Clean the touchscreen with a soft, clean, lint-free cloth. Use water,
isopropyl alcohol, or eyeglass cleaner, if needed. Apply the liquid
End End
to the cloth, and then gently wipe the touchscreen.
pece pece
Slver tp Slver tp
Fuse Fuse
Appendix