Marine Mode: Navigating; Step 1: Choose A Destination; Step 2: Set And Follow The Course - Garmin GPSMAP 620 Owner's Manual

Marine Mode: Navigating

To navigate using the GPSMAP 620, first choose a destination,
then set a course or create a route. Follow the course or route on
the Navigation chart or on the Mariner's Eye or Mariner's Eye 3D
screen.
tip: You can also use the Compass screen to follow a course or
route. See page 24 for more information.

Step 1: Choose a Destination

You can choose a destination using either the Navigation chart or
the Where to? menu.
Choosing a Destination Using the Navigation
Chart
1. From the Home screen, touch
2. On the Navigation chart, touch the place you would like to
navigate to. The pointer icon indicates the destination on the
chart.
tip: Touch and to zoom in and out. Touch anywhere on
the chart and drag it to pan the map. For more information on using
charts, see page 8.
GPSMAP 620 Owner's Manual
Charts > Navigation Chart.
Choosing a Destination Using Where To?
1. From the Home screen, touch
2. Touch a category:
• Waypoints—view a list of locations you marked previously
(page 19).
• Routes—view a list of routes you saved previously
19).
• Tracks—view a list of recorded tracks
• Offshore Services—view a list of nearby marinas and other
offshore points of interest, listed by proximity
• Search by Name—search nearby marinas and other
offshore points of interest by name
3. Touch the location you want to navigate to.

Step 2: Set and Follow the Course

You can set a course three ways:
• go to—(direct course) creates a direct line from your current
location to the destination (page
• route to—create a route from the destination to your current
location, adding turns along the way
Marine Mode: Navigating
Where To?
(page
(page 20).
(page 19).
(page 20).
14).
(page 15).