Installation Information - Garmin GPSMAP 396 Pilot's Manual

A > I I
PPENDIX NSTALLATION NFORMATION

Installation Information

This section of the Appendix provides information on connecting the
GPSMAP 396 to auxiliary devices and removing the antenna.
Connecting the Power/Data Cable
The power/data cable connects the GPSMAP 396 to an 11–35 VDC
system and provides interface capabilities for connecting external
devices. The color code in the diagram below and to the right
indicates the appropriate harness connections. Replacement fuse is a
3AG - 1.5 Amp fuse.
Ground
Black
Alarm
White
Voice (+)
Brown
Data In
Yellow
Power/Data Connector on the GPSMAP 396 Unit
158
Voice (-)
Orange
Data Out
Blue
Power
Red
Voice (-)
Orange
Data Out
Blue
Power
Red
Power/Data Connector on the Cable
Red: Power
Black:
Ground
Blue:
Data Out
Switch
Closed - On,
Open - Off
Yellow:
Data In
Ground
Black
Alarm
White
Voice (+)
Brown
Data In
Yellow
(-) (+)
11–35 VDC
RXD +
Autopilot/
NMEA Device
RXD -
(+)
White/Blue
Orange
GSD 20
Sounder
(-)
White/Brown
GPSMAP 396 Pilot's Guide