Honda HR-V 2018 Manual page 98

Indicator Name
Brake System
Indicator
(Amber)
*1:Models with the keyless access system have an
*2:Models with multi-information display
*3:On the left: Except Philippine, Cambodian, Laotian, Myanmarese and Taiwanese models, On the right: Philippine, Cambodian, Laotian,
Myanmarese and Taiwanese models
*4:Australian, New Zealand, African and Middle Eastern models
* Not available on all models
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
( w *1 , then goes off.
Comes on if there is a problem with
●
a system related to braking other
than the conventional brake
system.
Comes on if there is a problem with
●
the automatic brake hold system.
Comes on if there is a problem with
●
the City-Brake Active system
ENGINE START/STOP
Explanation
Stays on constantly - Have your
●
vehicle checked by a dealer.
Comes on along with the CTBA
●
indicator - The City-Brake Active
* .
system does not activate. Have
your vehicle checked by a dealer.
2 City-Brake Active system
P. 486
button instead of an ignition switch.
uuIndicatorsu
Message *2, *3
*4
*4
*4
—
*
Continued 97