Honda HR-V 2018 Manual page 586

Exhaust
Valve
Switch
ON
OFF
8. Turn the air compressor switch on to
inflate the tyre.
u The compressor starts to inject air into
the tyre.
u Keep the power system on while
injecting air.
9. Inflate the tyre to the specified air
pressure.
Front: 210 kPa (30 psi)/Rear: 200 kPa (29
psi)
10. Turn off the air compressor.
u Check the pressure gauge on the air
compressor.
u If overinflated, adjust the exhaust valve
to slowly remove air from the tyre.
When removing air, be careful not to let
the injected sealant spill out.
11. Turn the power system off.
12. Unplug the kit from the accessory power
socket.
13. Remove the air compressor hose from the
valve.
14. Reinstall the valve cap.
15. Repackage and properly stow the kit.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
1Inflating an Under-inflated Tyre
Make sure to turn the air compressor off when
checking the air pressure gauge on the air
compressor.
*
585