Honda HR-V 2018 Manual page 570

■
Getting Ready to Replace the Flat Tyre
Floor Lid
Jack
Tool Case
Spare Tyre
Wheel
Blocks
The tyre to be replaced.
* Not available on all models
1. Open the luggage area floor lid.
2. Take the tool case out of the luggage area.
3. Take the wheel nut wrench, jack handle bar
and jack out of the tool case.
4. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tyre.
5. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tyre.
uuIf a Tyre Goes FlatuChanging a Flat Tyre
*
1Changing a Flat Tyre
WARNING: The jack can only be used for helping an
emergency vehicle breakdown, not for changing the
regular seasonal tyre or any other normal
maintenance or repair operation.
The shape of the tool case varies by model.
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.
Continued
*
569