uuIndicatorsuMulti-Information Display Warning and Information Messages
Message
*1
*2
*3
—
*1:On the left: Except Philippine, Cambodian, Laotian, Myanmarese and Taiwanese models, On the right: Philippine, Cambodian, Laotian,
Myanmarese and Taiwanese models
*2:Except Australian, New Zealand, African and Middle Eastern models
*3:Australian, New Zealand, African and Middle Eastern models
* Not available on all models
128
Condition
Appears when you set the power mode to ON
●
without fastening the driver's seat belt.
Models with automatic lighting control
Appears if there is a problem with the automatic
●
lighting control system.
Models with auto high-beam
Appears when there is a problem with the auto
●
high-beam.
*
Fasten the seat belt properly before you start to
●
drive.
2 Shift Lever Operation P. 446, 448
Appears while driving - Manually turn the
●
lights on, and have your vehicle checked by a
dealer.
Manually operate the headlight switch.
●
If you are driving with the high beam headlights
●
when this happens, the headlights are changed
to low beams.
2 Auto High-Beam (High Beam Support
System)
Explanation
*
P. 207