Models with keyless access system
If the Keyless Remote Battery is Weak
If the beeper sounds, the indicator on the ENGINE START/STOP button flashes,
and the engine won't start.
Models with multi-information display
The To Start, Hold Remote Near Start Button message appears on the multi-
information display.
All models
Start the engine as follows:
1. Touch the centre of the ENGINE START/
STOP button with the H logo on the keyless
remote while the ENGINE START/STOP
button is flashing. The buttons on the
keyless remote should be facing you.
u
The ENGINE START/STOP button
flashes for about 30 seconds.
2. Depress the brake pedal and press the
ENGINE START/STOP button within 10
seconds after the beeper sounds and the
ENGINE START/STOP button changes
from flashing to on.
u
If you don't depress the pedal, the mode
will change to ACCESSORY.
uuEngine Does Not StartuIf the Keyless Remote Battery is Weak
587