Honda HR-V 2018 Manual page 119

uuIndicatorsu
Indicator Name
Auto High-Beam
Indicator
All-Wheel Drive
(AWD) System
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
*2:Models with multi-information display
* Not available on all models
118
On/Blinking
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off.
* Comes on when all the operating
●
conditions of the auto high-beam are
met.
Comes on for a few seconds when you
●
turn the ignition switch to ON
then goes off.
Comes on if there is a problem with the
●
AWD system.
Blinks when the AWD system is
●
overheated. The system is inactive.
*
Explanation
*1 ,
( w
2 Auto High-Beam (High Beam
Support System)
Stays on constantly - the engine
●
( w *1 , drives only the front wheels only in this
state. Have your vehicle checked by a
dealer.
Blinks while driving - the engine
●
drives the front wheels only in this
state. Stop in a safe place, shift to
and idle the engine until the indicator
goes off. If the indicator does not stop
blinking, take your vehicle to a dealer.
2 REAL TIME AWD with Intelligent
Control System
Message
—
* P. 207
—
P ,
(
*
P. 476
*2