Samsung AC009BNLDCH Service Manual page 62

No Parts
7 Heat Exchanger
Samsung Electronics
Procedure
1) Remove the screw fixed in Heat
Exchanger. (Use +Screw Driver)
2) Separate the indoor unit SENSOR from
the Heat Exchanger.
3) Separate the EEV connector from the
PCB.
4) Separate the Heat Exchanger from the
indoor unit.
5) Separate the EXPANSION COIL from the
EEV BODY.
(When servicing the EEV)
Disassembly and Reassembly
Remark
3-19