No
Parts
2
CONTROL-IN
Samsung Electronics
Procedure
3) Rotate CASE PCB 90 degrees as
shown in figures.
(Watch out for damage of hinge in
CASE PCB)
4) Separate Fan Moter wire as shown in
figures.
Caution:
When you separate the connector, pull
pressing the locking button.
5) Separate Blade Moter wire as shown
in figures.
Caution:
When you separate the connector, pull
pressing the locking button.
6) Cut off the Cable Tie tied up wires.
Disassembly and Reassembly
Remark
3-71