Samsung AC009BNLDCH Service Manual page 103

Disassembly and Reassembly
No Parts
3 Motor & Blower 1) Disconnect the motor wire
3-60
Procedure
2) Disassemble the 1 Bracket Motor and
2 Holder Motors
- Unscrew 2 screws
3) After disassembling the Motor and
Blower for the set, disassemble the
Blower by use of 3mm wrench.
4) Disassemble the 3 Case Blower Top.
- Unscrew 6 screws
5) Disassemble the Bracket Motor.
- Unscrew 6 screws
6) Disassemble the 3 Case Blower Out.
- Unscrew 6 screws
Remark
Samsung Electronics