4. Antenna Adjustment and Mounting
4.2. Integral antenna
Elbow
If your model has the integral elbow antenna you can adjust it to improve reception. The least signal
radiation is in a direction in line with the top (pointed end), so it is best to avoid having the antenna pointed
directly toward, or directly away from, the multinode. Typically, pointed straight up gives best
performance but your installation may vary. Loosen the 1.5mm (approx. 1/16") set screw located near the
antenna base. Rotate antenna for best reception. Do not rotate antenna more than 180 degrees either
direction or the internal antenna cable could be damaged. Tighten set screw.
Straight
If your model has the integral straight antenna you can adjust its position by rotating the sensor housing.
(See section 2). Typically, pointed straight up gives best performance but your installation may vary.
16
OneWireless XYR 6000 Wireless Valve Position Sensor Quick Start Guide
Figure 9 Elbow antenna adjustment
Figure 10 Integral straight antenna
Revision 1
1/20/09