Table of Contents
Advertisement
2. Sensor Mounting
2.4. Bracket mounting
Attach sensor to bracket
Align appropriate mounting holes in sensor with holes in bracket and secure the sensor to the bracket with
bolts and washers as needed. Use a backing plate for added strength as needed
Brackets and mounting hardware are user-supplied.
Sensor Mounting
Base of sensor mounted to
bracket, using threaded bolts
(sensor with threaded holes)
Base of sensor mounted to
bracket, using through bolts
(sensor with through holes)
Side of sensor base mounted
to bracket, using threaded
bolts (sensor with threaded
holes)
10
OneWireless XYR 6000 Wireless Valve Position Sensor Quick Start Guide
Attachment to bracket
Alternate mounting holes
in end of heads, using
bolts, washers, and
lockwashers.
Alternate mounting holes
in end of heads, using
nuts, bolts, washers, and
lockwashers. Use backing
plate if needed.
Select two mounting holes
in end of heads, using
bolts, washers, and
lockwashers. Use backing
plate if needed.
Example
Revision 1
1/20/09
Advertisement
Table of Contents
