Honeywell WCX Series Quick Start Manual page 3

This document describes mounting, installation and wiring of the WCX Series Valve Position Sensor and antennas.
Configuration, authentication and operation are covered in other documents.
Honeywell does not recommend using devices for critical control where there is a single point of failure or where
single points of failure result in unsafe conditions. OneWireless is targeted at open loop control, supervisory
control, and controls that do not have environmental or safety consequences. As with any process control solution,
the end-user must weigh the risks and benefits to determine if the products used are the right match for the
application based on security, safety, and performance. Additionally, it is up to the end-user to ensure that the
control strategy sheds to a safe operating condition if any crucial segment of the control solution fails.
Revision Information
Document Name
XYR 6000 Wireless Valve Position Sensor,
Model WCX Series Quick Start Guide
References
The following list identifies all documents that may be sources of reference for material discussed in this
publication.
Getting Started with Honeywell OneWireless Solutions
OneWireless Wireless Builder User's Guide
OneWireless Builder Parameter Reference
OneWireless XYR 6000 Wireless Valve Position Sensor, Model WCX Series User's Manual
OneWireless XYR 6000 Pressure Transmitter User's Manual
OneWireless XYR 6000 Temperature/DI Transmitter User's Manual
OneWireless XYR 6000 SmartCET Corrosion Transmitter User's Manual
OneWireless XYR 6000 HLAI Transmitter User's Manual
Revision 1 OneWireless XYR 6000 Wireless Valve Position Sensor Quick Start Guide
1/20/09
About This Document
Document ID
50040850
Document Title
Revision Publication
Number Date
1 1/20/09
iii