Level Installation (Only Vitosol 200-T) - Viessmann Vitosol 200-T Installation Instructions Manual

Installation on collector supports
9.
Fig. 72
Continue with chapter "Hydraulic connections" (see
page 63).

Level installation (only Vitosol 200-T)

For flat roofs
1
8 0
2 3
Fig. 73
(cont.)
4x
8.
4x
2
Installation information
■ Observe the maximum load and distance from the
edge of the roof for the on-site substructure to
DIN 1055.
Remove any gravel or similar from the installation
■
area. Cover the area with protective mats and posi-
tion the support slabs on top of the mats (see follow-
ing diagram).
Align the collector array to face due south.
■
Calculation of ballast and maximum load on the sub-
■
structure according to DIN 1055-4: 2005-03 and DIN
1055-5: 2005-07.
4 support slabs are required for each collector.
The Viessmann "SOLSTAT" calculation program is
available at www.viessmann.com to assist with cal-
culations.
57