Sony VENICE 2 Operating Instructions Manual page 41

41
3. Camera Operations: Operations on the Home Screen of the Sub Display
[Note]
The selection options change as follows depending
on the Project > Basic Setting > Input Color Space
(page 72) setting in the full menu.
– S-Gamut3.Cine/SLog3 or S-Gamut3/SLog3:
Preset Look / User 3D LUT / ART
– ACEScct: Preset Look / ACEScct with User 3D /
ACESproxy with User 3D / ACES with ART
4
Press the MENU dial or Set button (ITEM
key 3) to apply the setting.
Loading a User 3D LUT file
You can load a User 3D LUT file stored on an
SD card into the unit.
You can also load a User 3D LUT file into the
unit via a network (page 104).
[Note]
Save the User 3D LUT file in the following directory on
the SD card (page 110).
PRIVATE\SONY\PRO\LUT\
1
Insert the SD card into the SD card slot
(page 13).
2
Press the Edit Look button (ITEM key 4) on
the LUT selection screen.
The Look selection screen appears.
3
Press the Load File button (ITEM key 4).
A file type selection screen appears.
4
Use the button (ITEM key 2), button
(ITEM key 5), or MENU dial to select Load
User 3D LUT File.
5
Press the MENU dial or the Select button
(ITEM key 3).
The load destination numbers (01 to 16)
are displayed.
A file name is displayed for loaded
numbers.
6
Use the button (ITEM key 2), button
(ITEM key 5), or MENU dial to select a load
destination number.
7
Press the MENU dial or the Select button
(ITEM key 3).
The file name of the User 3D LUT file
stored on the SD card is displayed.
8
Use the button (ITEM key 2), button
(ITEM key 5), or MENU dial to select a file.
9
Press the MENU dial or the Load button
(ITEM key 3).
When the file is loaded successfully,
"Successfully loaded" is displayed.
10
Press the OK button (ITEM key 6).
Loading an ART file
You can load an ART file stored on an SD card
into the unit.
You can also load an ART file into the unit via a
network (page 105).
[Note]
Save the ART file in the following directory on the SD
card (page 110).
MPC-3628:
PRIVATE\SONY\PRO\CAMERA\MPC3628
MPC-3626:
PRIVATE\SONY\PRO\CAMERA\MPC3626
1
Insert the SD card into the SD card slot
(page 13).
2
Press the Edit Look button (ITEM key 4) on
the LUT selection screen.
The Look selection screen appears.
3
Press the Load File button (ITEM key 4).
A file type selection screen appears.
4
Use the button (ITEM key 2), button
(ITEM key 5), or MENU dial to select Load
ART File.
5
Press the MENU dial or the Select button
(ITEM key 3).
The load destination numbers (01 to 16)
are displayed.
A file name is displayed for loaded
numbers.