Sony VENICE 2 Operating Instructions Manual page 53

53
3. Camera Operations: User Functions Screen
Assignable Button Function
setting
Line B: User Frame Turns the User Frame Line 1 and User Frame
Disp. Line 2 display for Line B on/off.
Each time the button is pressed, the display
switches between User Frame Line 1 and 2
display  User Frame Line 1 display  User
Frame Line 2 display  User Frame Line 1 and
2 hidden.
H & V Flip 5) Flips the shooting mode image orientation.
Anamorphic De- Changes the Project > Basic Setting > Anamo.
Squeeze De-Squeeze setting in the full menu.
Each time the button is pressed, the setting
changes to the next item in the list of menu
selection options.
Color Bars Turns color bars on/off.
1)
Rec Starts/stops recording.
Rec Review Executes the Rec Review function.
Picture Cache Rec Turns the picture cache recording function
on/off.
AXS Slot Change Switches the active slot when two AXS
memory cards are inserted.
Switches between A and B each time the
button is pressed.
ND +1stop Switches the ND filter one stop in the darker
direction.
ND -1stop Switches the ND filter one stop in the brighter
direction.
Iris Open (1/16 stop) Opens the lens iris.
4)
Press and hold to open the iris until fully
open.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments.
State after rebooting Assignable Button
setting
Setting retained Iris Close (1/16 stop)
Setting retained
Setting retained
1) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected and
Technical > Special Configuration > RM/RCP Paint Control (page 91) is set to On in the full menu.
2) Switches to the same image as the main signal that is selected using Project > Basic Setting > Input Color Space
(page 72) in the full menu while the button is pressed.
3) Does not function if the button is pressed when Technical > Special Configuration > RM/RCP Paint Control
(page 91) is set to On in the full menu.
Setting retained
4) Does not function if the button is pressed when an RM-B170 or other remote control unit is connected.
5) Does not function if the button is pressed when Monitoring > Output Display > Flip Image (page 77) > H & V Flip
–
in the full menu is grayed out.
Setting not retained
Setting retained
Setting retained
–
–
–
Function
Closes the lens iris.
4)
Press and hold to close the iris until fully
closed.
This function is available when an E-mount
lens with power iris is attached.
The setting is in 1/16 stop increments,
whereas the iris indication is in units of 1/3
stop increments.
State after rebooting
–