Sony VENICE 2 Operating Instructions Manual page 80

80
3. Camera Operations: Monitoring Menu
Monitoring > Overlays/Frame Line
Makes settings related to information and frame lines superimposed on each output signal.
On/Off setting is selected using a checkbox (excluding Frame Line on Playback).
On: Checkbox selected
Off: Checkbox cleared
Menu item Setting
Level Gauge
Info. A (On/Off)
Info. B (On/Off)
Lens Status
Info. A (On/Off)
Info. B (On/Off)
Option (Meter/Feet)
Remote Control Status
Info. A (On/Off)
Info. B (On/Off)
Description
Selects whether to display the spirit level
information graphically in the output
information set for Overlay A and Overlay B.
[Note]
Level Gauge is grayed out and cannot be operated
when a CBK-3610XS is connected to the unit.
Selects whether to display the lens
information in the output information set for
Overlay A and Overlay B.
Selects the focus position display units.
Selects whether to display the remote control
status information in the output information
set for Overlay A and Overlay B.
Monitoring > Overlays/Frame Line
Makes settings related to information and frame lines superimposed on each output signal.
On/Off setting is selected using a checkbox (excluding Frame Line on Playback).
On: Checkbox selected
Off: Checkbox cleared
Menu item Setting
Frame Line A/B Color
Setup Option (White/Yellow/
Cyan/Green/Magenta/
Red/Blue)
Center Marker
Line A (On/Off)
Line B (On/Off)
Option (Cross/Open
Cross/Dot)
Picture Area
Line A (On/Off)
Line B (On/Off)
Aspect Ratio
Line A (On/Off)
Line B (On/Off)
Option (17:9/16:9/15:9/
14:9/13:9/9:16/4:3/1:1/
1.43:1/1.66:1/1.85:1/2:1/
2.35:1/2.39:1)
Aspect Ratio Type
Option (Line/Mask/
Line&Mask)
Surround View Type
Option (Line/Mask/
Line&Mask)
Mask Level
Option (0 to 15 (12))
Description
Sets the display color of frame lines.
Selects whether to display the center marker
in the output information set for Frame Line A
and Frame Line B.
Selects the display form (Cross/Open Cross/
Dot) of the center marker.
Selects whether to display the picture area in
the output information set for Frame Line A
and Frame Line B.
Selects whether to display the aspect ratio
marker in the output information set for
Frame Line A and Frame Line B.
Selects the mode (17:9/16:9/15:9/14:9/13:9/
9:16/4:3/1:1/1.43:1/1.66:1/1.85:1/2:1/2.35:1/
2.39:1) when displaying the aspect ratio
marker.
Selects the display form of the aspect ratio
marker.
Line: Displays lines with color set by Color.
Mask: Displays a lower video signal level for
areas outside the marker area.
Line&Mask: Displays lines with color set by
Color and a lower video signal level for
areas outside the marker area.
Selects the display form of the Surround View
marker.
Line: Displays the recording area using lines.
Mask: Displays the recording area by masking
(reducing) the video signal level outside
the recording area.
Line&Mask: Displays the recording area using
lines and by masking (reducing) the video
signal level outside the recording area.
Selects the brightness of the image outside
the marker when Aspect Ratio Type or
Surround View Type is set to Mask.