Table of Contents
Advertisement
5
-2 While making sure that
the READY lamp is lit, re-
peat the remaining number
of measurements.
◆ When the remaining number of mea-
surements is completed, the average
of the measured values will be dis-
played.
◆ If the instrument is left without per-
forming the remaining measurements,
no measured value will be displayed,
the instrument will no longer be ready
for measurement, and the average
measurement will be cancelled. To
perform average measurement again,
press the RESET button and repeat
the above steps from step 4.
6
Reading the value.
◆ If the measured value blinks, the
value is outside the guaranteed mea-
surement accuracy range. If "-0-" is
displayed, the measured value is out-
side the display range.
(For details of the guaranteed mea-
surement accuracy range or the dis-
play range, refer to the column of
page 27 on this manual.)
◆ To exit measurement, proceed to step
7. To take another measurement,
press the RESET button and continue
from step 4.
26
Advertisement
Table of Contents
