Table of Contents
Advertisement
3
Connect
cord's plug into an AC out-
let.
4
Set the POWER switch on
the main body to OFF, and
then place the instrument
on the charger unit.
◆ Make sure that the display faces to-
ward you. When the instrument is
set on the Charger unit properly, the
CHARGER lamp will light up.
◆ Charging will be completed in ap-
proximately 32 hours. Measurement
can be performed approximately 400
times with fully charged battery.
◆ Measurement can be performed ap-
proximately 100 times with 6 hours
battery charged.
◆ The power of the batteries will be di-
minished if the instrument is left un-
charged for long periods of time, so
ensure that it is recharged prior to
use.
14
the
AC
Power
Advertisement
Table of Contents
