Brewing Buttons Programming - Gaggia Concetto Operating Instructions Manual

STEAM
(Except COFFEE set-up)
• Immerse the spout (17) in the beverage to be heated.
• Turn the knob counterclockwise (13). When the required
temperature is reached, close the knob (clockwise).
After every operation, clean the steam spout with a (damp
and clean) cloth/sponge from the residues of the previously
heated beverage.
(*) Before any brewing, place the milk suction tube (30 - F. 4)
inside the milk container.
(*) (*) Adjust the cream quantity using the pin (23 - F. 4)
(Pr. 12.8).
12.6

Brewing buttons programming

The beverage quantities linked to the respective buttons, can be
directly programmed by keypad.
To program and re-program the buttons follow these instructions:
- Switch on the machine and prepare it for the use
- Place the container under the selected spout
- Push and hold the button. The message "PROGRAMMING"
will be displayed
- Release the button and set the dose to be brewed
(***) N.B.: Keys ,
beverages with any possible combination of milk and cof-
fee. Please refer to an authorized customer service center
to change default settings.
Here is the button programming scheme.
CONCETTO
and can be preset for brewing
34/120
English