Breather Hose; Cylinder Head Decarbonization; Adjusting The Valve Clearance - Yamaha MZ360 Service Manual

PERIODIC MAINTENANCE
1
2
3
4
5
6
7
8
9
10
1
2

BREATHER HOSE

1.
1

CYLINDER HEAD DECARBONIZATION

1.
2.
3.

ADJUSTING THE VALVE CLEARANCE

1.
3
NOTICE
Before removing the spark plug, use compressed air
4
to clean the cylinder head cover to prevent dirt from
falling into the engine.
5
2.
Check:
• Breather hose "1"
Crack/damage  Replace.
Poor connection  Connect.
Remove:
• Cylinder head assembly
(Refer to "CYLINDER HEAD COVER, CYLINDER
HEAD" on page 3-33)
Eliminate:
• Carbon deposits
(Refer to "CHECKING THE CYLINDER HEAD" on
page 3-35)
Install:
• Cylinder head assembly
(Refer to "INSTALLING THE CYLINDER HEAD
ASSEMBLY" on page 3-36)
Remove:
• Spark plug cap "1"
• Spark plug "2"
Remove:
• Breather hose "3"
• Air filter case stay "4" (MX360)
• Cylinder head cover "5"
• Cylinder head cover gasket
2-12