ELECTRICAL COMPONENTS
O.L"
Ω"
1
CHECKING THE SWITCH CONTINUITY
Check each switch for continuity with the tester. If the con-
tinuity reading is incorrect, check the wiring connections
and if necessary, replace the switch.
NOTICE
Never insert the tester probes into the coupler termi-
nal slots. Always insert the probes from the opposite
end of the coupler, taking care not to loosen or dam-
age the leads.
Digital circuit tester (CD732):
90890-03243
Model 88 Multimeter with tachometer:
YU-A1927
TIP
• Before checking for continuity, set the digital circuit tester
to the " " range.
• When checking for continuity, switch back and forth
between the switch positions a few times.
CHECKING THE FUSE (Equipped models)
NOTICE
To avoid a short circuit, always set the engine switch
to "OFF" when checking or replacing a fuse.
1.
Remove:
• Fuse "1"
5-8
1
2
3
4
5
6
7
8
9
10