Mechanical And Climatic Ambient Conditions - Siemens SIMOTION SCOUT D410 Manual

Technical data

6.8 Mechanical and climatic ambient conditions

6.8 Mechanical and climatic ambient conditions
Conditions of use
SIMOTION D410 is designed for use in stationary, weather-protected locations. The
conditions of use exceed the requirements of the environmental test according to
DIN IEC 60068-2-2.
SIMOTION D410 meets the conditions of use, Class 3C3, according to DIN EN 60721-3-3
(operating locations with high traffic densities and in the immediate vicinity of industrial
equipment with chemical emissions).
Use prohibition
Without additional measures, SIMOTION D410 may not be used in
● Locations with a high percentage of ionizing radiation
● Locations with extreme operating conditions, e.g.,
● In systems, which require special monitoring, e.g.,
An additional measure for using SIMOTION D410 can, for example, be installation in
cabinets.
Mechanical ambient conditions
SIMOTION D410 meets the following standards for mechanical stress:
● Vibration load: DIN EN 60721-3-3, Class 3M4
● Shock load: DIN EN 60721-3-3, Class 3M4
● Free fall: DIN EN 60721-3-2, Class 2M1 and 2M2
● Toppling: DIN EN 60721-3-2, Class 2M1
The mechanical ambient conditions for SIMOTION D410 are listed in the following table in
the form of sinusoidal vibrations.
86
– Dust accumulation
– corrosive vapors or gases
– Elevator installations
– Electrical systems in particularly hazardous rooms
D410
Manual, 05/2009