Table 14: General Icons - Motorola MXP600 Feature User Manual

MN006360A01-AE
Chapter 7: Icon Indications
Icon Name
Direct Mode
Repeater Mode
DMO Repeater
Communication
Mode

Table 14: General Icons

Icon Name
All Ring Tones Off
Simplex Ring Mut-
ed
Duplex Ring Muted
Vibrate Only
Vibrate then Ring
Low Audio
High Audio
Permanent Disable
in Car Kit.
Earpiece Connec-
ted
52
Description
Your radio is in Direct Mode, a radio-to-radio commu-
nication.
Your radio is operating as a repeater in Repeater
Mode.
The Repeater option in DMO Mode is selected.
• Solid – Your radio detects the repeater. For exam-
ple, your radio receives a presence signal.
• Blinking – Your radio does not detect the repeater
yet or attachment is happening.
• No icon – Radio-to-radio and gateway communi-
cation.
The GW + Rep option in DMO Mode is selected.
Solid – Your radio detects the repeater and the re-
peater icon is solid. Your radio detects the gateway
and the In Service icon is solid. For example, your
radio receives a presence signal.
Description
• The volume is set to zero when Volume Adj. Mode is set to
Common.
• Both Simplex and Duplex ring volume is set to zero when
Volume Adj. Mode is set to Individual.
• The Simplex ring volume is set to zero.
• Duplex ring volume is set to more than zero.
• The Duplex ring volume is set to zero.
• The Simplex ring volume is set to more than zero.
To alert you of an incoming message, your radio vibrates.
To alert you of an incoming message, your radio vibrates and
then rings.
The audio is set to a minimum level.
NOTE: You can set different icons (A to E) for audio
profiles.
The audio is set to a maximum level.
NOTE: You can set different icons (A to E) for audio
profiles.
Audio is disabled in the car kit.
An earpiece is connected to your radio.