Pairing Bluetooth Devices With Your Radio; Pairing With Devices Using Nfc Tag - Motorola MXP600 Feature User Manual

MN006360A01-AE
Chapter 20: Bluetooth
Option
20.4

Pairing Bluetooth Devices with Your Radio

Pairing is a process that creates a link between two Bluetooth-enabled devices. Once paired, devices
remember each other and every subsequent connection between them is authenticated automatically.
Procedure:
1 From the home screen, press the Menu key.
2 Select Bluetooth→Add Device.
The device that you want to connect with must be in pairing mode.
3 Highlight the required device and select Connect.
Improve the connection between an accessory and your radio by pressing the PTT button on the
accessory.
4 If needed, enter a PIN code or a passkey.
NOTE: If you enter an incorrect PIN code and the subsequent pairing take too long or
result in an error message, power cycle the Bluetooth device. Your radio accepts three
attempts.
20.5

Pairing with Devices Using NFC Tag

Near-Field Communication (NFC) is a wireless technology used to ease pairing between two NFC-
enabled devices. Your radio and the device must be close together.
Procedure:
1 Touch the NFC tag of the device to the NFC tag of your radio.
The device prompts you to confirm pairing with the radio.
2 Select pairing confirmation on the device.
Bluetooth standard pairing process occurs between your radio and the device.
124
Description
• Power Optimized – The Bluetooth audio link is released
when there is no active call. This option increases the bat-
tery life time, but causes a delay in the call setup time
for group calls. This delay can cause audio loss on some
headsets.
• GC Optimized – The Bluetooth audio link is kept open all
the time. This option ensures that audio in group calls is
not delayed and the audio link is not lost, but shortens the
battery life time.
NOTE: This setting does not affect the Motoro-
la Solutions headset with PTT (NNTN8143_ or
NNTN8191_) as it is always in the GC Optimized
mode.